Tutorial Upgrade Firmwares LG Optimus ME

Tutorial Upgrade Firmwares LG Optimus ME - Most Techno World time posting Here is a Tutorial Upgrade Firmwares LG Optimus ME, It is suitable for those of you who want to upgrade or downgrade its LG Optimus ME

Required to upgrade / downgrade firmware Optimus me:
1. Kdz FW updater (install) download here
2. B2C (install) dowload here
3. LG USB Mobile Drive (install) download here


firmwares for it ..
LG Optimus Me Official Firmwares V10C Download

[ASEABK] download here
LG Optimus Me V10E Firmwares Download:

[ACISSV] download here
[ABALSV] download here

LG Optimus Me V10F Official Firmwares Download:

[ACISSV] download here
[ABALSV] download here

Here's how to Upgrade Firmwares LG Optimus ME:
1) take out of the archive folder with flasher KDZ_FW_UPD and move it to the root of drive C:
2) In the C: \ KDZ_FW_UPD create a folder named LGP350
3) In her move firmware format. Kdz
4) Set United LG Mobile Driver (if not installed)
5) Charge your phone to fully charge (or almost until)
6) Connect your phone and wait until the install driver software (if you first connected it)
7) Turn off the Virtual Modem LGE. To do this in Windows go to Control Panel> System> Hardware> Device Manager> Modems> Right-click on the LGE Virtual Modem and click Disable.

8) Turning off the phone from the PC and switch off the phone
9) Hold the button button improv volume Decrease the volume + button + power button, the yellow is displayed Emergency Mode - emergency mode. In principle, proshivalschik Itself can put the device in this mode, but for safe drivers and to avoid future problems, it is better to take this step alone.
10) connects to a computer our devices (sticks one end of the cord into the computer, the other into the phone)

Tip: preferably before flashing remove the memory card, SIM-card.

Firmware

1) Run the flasher KDZ_FW_UPD
2) In the "Type" select "3GQCT" (3G Qualcomm CDMA Technologies)
3) Specify the path to the firmware (V10F_00.KDZ), by clicking on the button to the right of the field "file KDZ
4) Press the button "Start update"
5) I went to the firmware process
6) Do not unplug the phone!
7) We are waiting for notification of completion of the firmware (== Completed ==), then close the window and disconnect the phone flasher.
8) Finish

Note: recommended to use the firmware that terakhirV10f [ACISSV] or V10f [ABALSV]